Compatibility & setup
Find a setup guide for your dental imaging software, then follow the three steps below.
These are software-family setup resources. Confirm your exact software version before choosing a capture route.
No checked setup guide is listed for this name and computer choice yet.
Ask ProDENT Support with your camera model, operating system and version, and imaging software name and version.
Browse the setup guides below. Match your computer and camera model; a guide does not confirm every software version.
Eaglesoft / Patterson Imaging
Windows · Camera button
Use ProDENT Capture and select the matching imaging-software setup. Keep its capture window active and check that the photo is saved.
DEXIS
Windows · Camera button
Follow the DEXIS capture-window and ProDENT Capture settings. Confirm the instructions for your DEXIS release.
Carestream / Kodak KDI Imaging
Windows · Camera button
This guide is for Kodak KDI / Carestream Imaging. Check your software version and the STV camera module required by the guide.
Apteryx / XrayVision
Windows · Camera button
Select the video source in XrayVision, then follow the capture-button settings for your software release.
Open Dental
Windows · TWAIN · PD760 Pro / PD780AU
Install the ProDENT TWAIN driver, then select the ProDENT source in your TWAIN acquisition window. Confirm your Open Dental version and required capture workflow.
Praktika
Windows · Camera capture guide
Follow the camera/video-stream steps, allow camera access when prompted and save the captured images in Praktika.
Windows · TWAIN · PD760 Pro / PD780AU
If your workflow uses TWAIN, use the ProDENT Windows driver and confirm your Praktika version.
MacPractice
Mac · Camera button
Use the MacPractice preset in Intraoral Camera Capture. Complete guided setup and Accessibility permission; keep MacPractice on its capture screen. MacPractice provides preview and saves the image.
Guide model list: PD740, PD750, PD760, PD760 Pro, PD720 and PD780. Ask us to confirm PD780AU on Mac.
Oryx
Mac · Camera button
Use the Oryx preset in Intraoral Camera Capture. Complete guided setup and Accessibility permission; keep Oryx on its capture screen. Oryx provides preview and saves the image.
Guide model list: PD740, PD750, PD760, PD760 Pro, PD720 and PD780. Ask us to confirm PD780AU on Mac.
Install in three steps
- Connect the camera. Plug it into USB and open the capture screen in your imaging software. Select the camera/video source for live preview.
- Set up your capture route. Windows camera button: install ProDENT Capture and choose your software setup. Mac button: install the Mac app and complete guided setup. Windows TWAIN: close imaging apps, install the PD760 Pro / PD780AU driver, then reopen your software and select the ProDENT TWAIN source.
- Capture and check the saved photo. Follow your software guide, capture a test image and confirm it is saved in the intended patient record. If you need the physical camera button, test a real press; a shortcut confirmation alone does not confirm image saving.
Camera model & capture-route notes
- Mac button setup: The current guide lists PD740, PD750, PD760, PD760 Pro, PD720 and PD780. Complete guided setup and a real button test. For PD780AU on Mac, ask support to confirm your exact setup.
- Windows TWAIN: The current ProDENT driver names PD760 Pro and PD780AU and supports 32-bit and 64-bit TWAIN applications. For standard PD760 or another model, confirm the driver route with support.
- USB video, camera button and TWAIN: These use different setup routes. The Mac button app sends a shortcut; your imaging software provides preview and saves the image. For a separate Mac preview, capture and export workspace, review ProDENT View on the Mac apps page.
A listed guide is a setup resource, not approval for every camera, computer or software version. Confirm your exact setup with ProDENT Support.